Supertech Black Nitride Intake Valves for Supra GR

Supertech black nitride intake valves for 2020+ Supra GR. These valves are the standard 30.10mm size to match your factory head diameter. Sold as a set of 12 or individually as needed. Please do all your research and consult your engine builder if necessary! Black nitride valves are made from one piece forged stainless steel then go through a special hardening process to lessen the friction between the valve and guide.

Vehicle Fitment:
2020+ Toyota Supra GR
B58 A90 A91 MKV MK5
• Must be used with keepers KPR-5.0/7S
• For intake valves only
• Exhaust valves are sold separately

Additional Valve Specs:
• Stem Diameter 4.96mm
• Length 99.5mm

The 'Black Nitride' is a hardening treatment that is applied to the whole valve whereas the chrome coating is only applied to the stem. The microhardness is higher than the stainless steel base material, keeping good ductility beneath the hard nitrided layer. Microhardness is 800HV minimum.

The Black Nitride surface finish is smoother than with chromed stems, having less friction between stem and guide. The higher the engine speed the bigger the power loss due to internal engine friction! The Black Nitride reduces this power loss due to less valve-guide friction.

Photos are for reference.