FP Zero Evo IX Turbo
2,464.15€
Sold By: Baltic Turbo Motors
The FP Zero turbo comes with a 86HTZ compressor side rated at 78LB a minute and uses the new billet
SKU: FP-ZERO-BB-EVO9-1
Categories: Performance Parts
Share:
The FP Zero turbo comes with a 86HTZ compressor side rated at 78LB a minute and uses the new billet stainless CHRA. This is the biggest and baddest stock location turbo offered!
Compatible with these models:
Mitsubishi Evolution IV V VI VII VIII IX
Please review all options before purchase:
The FP Zephyr comes with the Xona Rotor dual ceramic ball bearing CHRA and FP stainless turbine housing with MVS wastegate flange. is sold separately. The stainless turbine housing is NOT compatible with the stock-style downpipe or o2 housing. There is a lot of information below to help you with your install!
Shipping Time: (8-10 Weeks)
Forced Performance Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.
For Evo 4-8 Install:
The FP Turbos are based on the Evo 9 platform. If you have an Evo 4-8, you'll need the Evo 9 j-pipe and water lines. Please check below for which oil feed line you'll need. Recommended for install: .
FP Part Numbers:
Compatible with these models:
Mitsubishi Evolution IV V VI VII VIII IX
Please review all options before purchase:
The FP Zephyr comes with the Xona Rotor dual ceramic ball bearing CHRA and FP stainless turbine housing with MVS wastegate flange. is sold separately. The stainless turbine housing is NOT compatible with the stock-style downpipe or o2 housing. There is a lot of information below to help you with your install!
Shipping Time: (8-10 Weeks)
Forced Performance Turbos are built to your spec. These are not in stock. Typical wait time has been 8-10 weeks.
For Evo 4-8 Install:
The FP Turbos are based on the Evo 9 platform. If you have an Evo 4-8, you'll need the Evo 9 j-pipe and water lines. Please check below for which oil feed line you'll need. Recommended for install: .
FP Part Numbers:
2005080
The FP Stainless Turbine Housing | |
FP STAINLESS HOUSING (SS) |
| Bolts to stock exhaust manifold or aftermarket factory-placement manifold with Mitsu flange. |
| Does NOT fit with any factory-style o2 housing or downpipe. |
| Uses (Not included.) |
| Recommended Options for Install: • • • |
| Manifold Gasket (Not Included) • |
FP Ball Bearing Zero | ||
FP Zero Turbo: | Ball Bearing Specs: |
| Billet CHRA: | Xona Rotor Dual Ceramic BB |
| Oil Line: | NOT Included. Compatible with stock feed lines! (Optional) FP SS Feed Line is (.) |
| Compressor Wheel: | 86HTZ |
| Flow Rating: | 78 lb Per Minute |
| Compressor Wheel Inducer: | 62.1mm |
| Compressor Wheel Exducer: | 86.2mm |
| Turbine Wheel Inducer: | 67.7mm |
| Turbine Wheel Exducer: | 62.2mm |
| Compressor Housing: | 84mm Flow Advancement Port Cover |
Black Ceramic Coating (+$100): | ||
| You can have your stainless housing treated with a black ceramic coating to help keep the heat in, keeping your engine bay cooler and it will look amazing! | ||
Add your review
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.
